Light steel shutter equipment

Category：

Customized cold forming equipment according to customer needs

86-15028755418

haichijixie@163.com

Inquiry

Details

The shutter forming machine is mainly composed of forming host, PLC computer control system, hydraulic pump station system and full-automatic post shearing system. Shutter molding machine products are mainly used in building facilities, advertising and construction industries. It is a kind of equipment with less investment, fast actual effect, convenient materials and wide application. The products produced by this equipment have the characteristics of beautiful appearance and can be spliced and installed in a variety of colors

the forming speed of light steel shutter equipment is 0.5-250m/min, and the commonly used speed range is 25-30m / min. The main factors that affect the forming speed of Jiajia include: the composition of the strip steel, the yield strength and hardness of the strip steel, the thickness of the strip steel, the difficulty of the forming operation, the length cutting of the formed profile, the number of forming frames, the auxiliary processing required, and the application of lubricant (coolant)

the lower limit forming speed (0.5m/min) is required to process Qin alloy into complex profiles. Correspondingly, the upper limit forming speed can be used for forming under the ideal forming condition - F. for example, aluminum and Annealed Low Carbon Steel with a thickness of less than 0.9mm and a long fixed length (about 25m) can reach 245m/min when the forming is relatively mild. In order to achieve the highest forming speed, even if the total deformation is small, more forming passes are often used to reduce the deformation of passes on each forming machine. When high-speed forming is adopted, it is usually impossible to carry out auxiliary processing such as punching, stamping, welding, etc., and lubrication is required one by one

when flying shears or flying saws are used to determine the length, they often cannot reach the large speed allowed by molding. The sizing of most roll bending products is through sliding shear (or sawing) machine base. The higher the forming speed is, the longer the sliding base needs to move to determine the accurate sizing Therefore, the actual allowable large forming speed often depends on the size of the shear cycle

parameters of light steel shutter equipment:

forming cycle: 1 second

transmission mode: gear transmission / chain transmission

working air pressure: 4000 MPa

excitation frequency: 300 times / minute

type: mechanical equipment

overall dimension: 3000*600*1200 cm

purpose: zinc steel profile manufacturer

vibration frequency: continuous Hz

machine weight: 0.66 T

diameter: 2.0m

total power: 3kw

forming pressure: 1 Ton

Keywords:

Show details

Consult