Home page

Leveling machine

Leveling machine is a commonly used equipment in sheet metal processing. The finalization of the leveling machine mainly depends on the thickness, material and requirements of the calibrated strip.

Category：

Kaiping machine series

86-15028755418

haichijixie@163.com

Inquiry

Details

Leveling machine is a commonly used equipment in sheet metal processing. The finalization of the leveling machine mainly depends on the thickness, material and requirements of the calibrated strip. The thicker the material, the better the structural rigidity required. The less the number of rollers, the larger the roller diameter, the greater the power, and vice versa

the drum material of the leveling machine rolls freely on the movable shaft seats of the left and right boxes to open the drum material. The steel plate is pushed to the leveling machine on the conveyor frame, which is the previous process to cooperate with the leveling machine

the leveling machine is the equipment for leveling metal plates. It is used for leveling lines. Steel plates and uneven plates can form uncoiling, leveling, shearing production lines and other plate product production lines according to relevant configurations

the core shaft of the leveling machine connects four sector plates through the inclined dovetail grooves on the four end faces. Each sector plate passes a radial slide at the tail end to prevent its axial movement, but it can realize radial expansion and contraction. A rotary oil cylinder is connected to the tail end of the drum shaft, and the piston rod of the oil cylinder drives the front four edge shaft to slide axially through the pull rod in the center of the drum shaft, thereby driving the radial expansion and contraction of the sector plate. The nominal diameter of the drum can be increased by four additional sector plates. The uncoiler frame can be moved on the guide rail of the base and driven by the hydraulic cylinder to realize the central position control. In order to strengthen the stability of the drum, a support arm device is designed at the drum head. When there is a steel coil on the drum, the support arm is driven by the oil cylinder to hold the drum head. At ordinary times, the support arm retracts, which will not affect the winding

features of leveling machine:

1. Main frame: it is made of section steel, A3 steel plate and \45 steel forged bearing seat after assembly and welding, and it will not deform after annealing and qualitative treatment; The two bearing seats are bored at one time to determine the concentricity of the spindle installation without radial runout

2. Expansion and contraction drum: adopt sliding block type push-pull expansion drum; Four arc-shaped plates, line cutting slider pairs, expanding and shrinking diameter Ф 460~ Ф 520； The working length is 1300mm. The overall mandrel determines the concentricity of the drum during expansion and contraction. The drum surface is plated with hard chromium

3. Braking device: the pneumatic disc brake assembly is adopted, and the braking force can be adjusted. When parking, the brake is tight, and when driving, the brake is towed. Make sure that the roll will not be loosened in the standby and startup States, so as to avoid scratching the plate surface when loosening the roll

Keywords:

Show details

Consult