Home page

Leveling machine

Leveling machine, also known as straightening machine and leveling machine, is placed between the material rack (or cutting machine) and the feeder for the leveling and feeding of coiled materials.

Category：

Kaiping machine series

86-15028755418

haichijixie@163.com

Inquiry

Details

Leveling machine, also known as straightening machine and leveling machine, is placed between the material rack (or cutting machine) and the feeder for the leveling and feeding of coiled materials. It is a commonly used equipment in plate processing. The finalization of the leveling machine mainly depends on the thickness, material and requirements of the strip to be calibrated. The thicker the material, the better the structural rigidity required. The less the number of rolls, the larger the roll diameter, the greater the power (the width is determined), and vice versa

the leveling machine is equipped with an upper die and a lower die, in which the upper die is fixedly connected to the push rod of the hydraulic cylinder, the cylinder body of the hydraulic cylinder is fixed to the support frame, and independent cooling water paths are set in the upper die and the lower die, and the outlet and inlet of the cooling water path are located on the upper die or the lower die respectively. The ratio of radius or center distance of at least the first five rollers starting from the entrance of the leveler is the same as that of the traditional leveler, and the ratio of radius or center distance of at least five rollers starting from the entrance of the leveler is similar to that of the crimp canceller, and the advantage is that the center distance between the intermediate rollers of the leveler increases. It can avoid the erosion of impurities on the tool or tool blank while the speed is suitable for quenching and cooling, so as to determine the quality of the surface and hardness metallographic structure of the tool or tool blank, and avoid the pollution of cooling oil

the leveler unit includes a loading trolley, a decoiler, a pallet pressing device, a six fold leveler host, a tracking shear system, a conveying lifting workbench, a double-layer pneumatic discharge rack, a hydraulic lifting platform, a unloading trolley, a hydraulic system, and an electrical control system. The main components of the hydraulic system of the production line adopt components with appropriate precision in Taiwan; The full positioning servo system of German Lenz company is used to control the length tracking and shearing system. The electrical control system adopts incoming PLC program controller and touch screen

usage:

1. Place the workpiece stably, make sure the position is correct, and then start the work of the leveling machine. For example, when leveling narrow steel, it should be placed in the center of the leveling machine

2. When the leveling machine is working, the staff cannot put their hands on the workpiece, and it is forbidden to measure or inspect. The flatness of the workpiece can be measured only after shutdown

3. For large workpieces, operators cannot stand on the workpieces when running

4. After starting up, hands and clothes should not be rolled into the roller table of the leveling machine

5. If abnormal noise is found during work, workers should stop the machine immediately for inspection

leveler is mainly used to correct plates of various specifications and cut into blocks. This machine is suitable for leveling all kinds of cold and hot rolled plates. Because of its convenient and simple operation, it is widely used in machinery, metallurgy, building materials, chemical industry, electronics, electric power, light industry and other industries, especially in shipbuilding, rolling stock, boiler bridge, metal structure factory and other industries, and has become an excellent contract abiding product in production

Keywords:

Show details

Consult