Home page

Ridge tile forming machine products

Roof ridge tile forming machine is widely used in the production of roof ridge tiles of various industrial plants, civilian houses, warehouses and simple steel sheds, and it is beautiful. This machine is produced continuously as the tile pressing machine, replacing the cumbersome process of making ridge tiles with bending machine, saving human resources and reducing labor costs. The machine is mainly composed of a discharging machine, a feeding and guiding platform, a forming host, a forming and shearing device, a hydraulic station, a computer control system, etc

Category：

Ridge tile forming machine series

86-15028755418

haichijixie@163.com

Inquiry

Details

precautions for the use of ridge tile forming machine:

during the production of ridge tile forming machine, it is strictly forbidden to work beyond the closing height, that is, the distance between the bottom surface of the upper sliding box and each working surface is 290 mm. It is required to add the height of the upper and lower molds after mold closing, and the thickness of the upper and lower base plates plus the thickness of tiles, which is not allowed to exceed 290 mm. This requirement should be followed when manufacturing molds to avoid machine tool accidents. Always observe the height of lubricating oil in the sliding box and the bodies on both sides. The tile press is mainly composed of left and right machine bodies, bottom connecting rods, top chassis cover, sliding seat, hexagonal runner, belt pulley, gear mechanism, sheave mechanism, cam mechanism, lubrication pump, oil circuit system, electric control part, etc. The equipment should be wiped frequently and kept clean. There should be no mud and water

upper die stamping process of ridge tile forming machine:

the ridge tile forming machine is driven by the motor through the belt pulley to drive the input shaft, through the pinion and big gear to drive the upper shaft, and through a set of cam mechanism to drive the sliding seat equipped with the upper die to move up and down, so as to realize tile pressing. The indexing of the worktable of the ridge tile forming machine is realized by the gear set installed at the end of the upper shaft, driving the shift pin gear, and pulling the grooved wheel installed on the hexagonal runner shaft to achieve indexing positioning. At both ends of the upper shaft, there is a return cam conjugate with the pressing cam installed on the same shaft, and the positioning of the lower die in the working position is realized through the positioning rod and positioning disc

main technical parameters of ridge tile forming machine:

1. Installation size: 8000mm × 1000mm × 1400mm

2. Number of forming passes: 12 passes

3. Roller material: 45 # steel

4. Roller plating thickness: 0.05mm

5. Cutter material: cr12

6. Forming speed: 9m/min.

7. Electric control system: industrial computer PLC control

8. Host power: 3kw

9. Hydraulic station power: 3kw

10. Plate thickness: 3kw 0.4-0.6mm

11. Expanded width of plate: 312 mm

Keywords:

Show details

Consult