Home page

Rolling shutter equipment

Rolling shutter equipment is widely used in the production of rolling gates in various industrial plants, warehouses, supermarkets and shopping malls. Composition of rolling gate machine: the machine is mainly composed of manual feeding rack, feeding and guiding platform, forming host, forming and cutting device, etc

Category：

Rolling shutter door equipment series

86-15028755418

haichijixie@163.com

Inquiry

Details

the roller shutter door equipment adopts synchronous molding and rolling molding, computer control, hydraulic shearing, dynamic length counting, and the flatness rules of the plate surface after molding, which thoroughly changes the distortion, paint scratch, peak angle blur, cracking and other phenomena of the traditional equipment after molding. It is an ideal supporting equipment for door and window manufacturers

roller shutter door is a door with multi joint movable door pieces connected in series and rotating up and down with the roller above the door as the center in a fixed slide. It is suitable for public places or residences such as commercial facades, garages, shopping malls, hospitals, factories and mining enterprises. Especially where the door opening is large and it is inconvenient to install the ground door body, it is convenient to open. Such as garage doors, shopping malls, rolling shutter doors with stable performance, aircraft hangar doors

roller shutter equipment uses galvanized steel plate or color steel plate or aluminum plate of different colors as raw materials. The color steel plate roller shutter produced has gorgeous color, no fading, no rust, and is widely used in stores, workshops, warehouses. It has stable performance and three times higher strength than aluminum alloy doors

the roller shutter door equipment is mainly composed of a discharging machine, a feed introduction platform, a molding host, a molding shear device, a hydraulic station, a computer control system and other parts, and is used in conjunction with the selvedge machine. The optional configuration includes ordinary discharging machine and hydraulic discharging machine. The products are widely used in various industrial plants, warehouses, supermarkets and shopping malls

advantages of roller shutter equipment:

1. The roller shutter equipment has beautiful and optimized shape, low noise and good production efficiency

2. It can produce not only single-layer profiled plates, but also ordinary I-shaped aluminum composite plates and tongue and groove plug-in composite plates. One machine can be used for multiple purposes

3. The host adopts excellent frequency conversion speed regulation and automatic fixed length cutting

4. The rolling shutter equipment adopts high-quality automatic control software to realize production information management

5. The automatic control system of the whole unit adopts a highly integrated network, which makes the automatic system have good performance

6. The rolling shutter equipment also has the advantages of operation, maintenance, maintenance, mechanical debugging, easy mold replacement and so on

technical parameters of rolling shutter door equipment:

1. Installation size: 12000mm × 1800mm × 1500mm

2. Number of forming passes: 22-24 passes

3. Roller material: 45 # steel

4. Roller plating thickness: 0.05mm

5. Cutter material: cr12

6. Forming speed: 9m/min

7. Electric control system: industrial computer PLC control

8. Host power: 3kw

9. Hydraulic station power: 3kw

10. Plate thickness: 0.4-0.6mm

11. Expanded width of plate: 1000mm

Keywords:

Show details

Consult